Warning Signs and Considerations When Preparing Your Metal Building for Winter Weather
It’s nearing the end of the calendar year, which means Connecticut has already experienced its first snowfall. A large snowstorm or a series of winter weather events can create adverse conditions for buildings that require immediate attention, especially as few people are aware of the consequences snow build-up can have on a building’s roof. During this time of year, Varco Pruden Builders advise their customers on metal building maintenance and prevention methods that help alleviate the damage that can occur from snow build-up on rooftops. While property insurers are beginning to provide more information on what to do in the event of a snow emergency, the roof experts at Varco Pruden have extensive experience assisting building owners in preventing significant damage.
Early prevention and preparation are vital to help protect your building investment from winter weather and snow build-up.
We advise building owners to keep drains and gutters clear of ice and snow to facilitate melting run-off. Ice and snow build-up can cause excessive loads, even without drifts. Heat tapes in gutters and downspouts may assist in preventing ice build-up, except in extremely low temperatures.
There are warning signs inside the building you should be aware of that indicate excessive snow accumulation, including:
– The deflection of purlins
– Ceiling tiles popping in dropped ceilings
– Unusual noises
For new buildings, conditions that could cause a damaging accumulation of snow can be highlighted during the design phase of the project, and prevention measures can be taken. This could include any of the following:
– Stepped elevations
– Closely adjacent buildings
– Ridges and valleys
– Parapets
– Rooftop units
– Below-eave canopies
If any of these situations occur, it is best to contact a Varco Pruden Builder such as your Connecticut local Munger Construction for assistance!
Source: Varco Pruden
- Category: Roofing, Tech Tips, Seasonal Tips
- Service: Tech Tips, Pre-Engineered Steel, Maintenance